CO2 Incubators
Memmert CO2 Incubator ICO 50, 230Volt, +5C above Ambient to +50C, Humidity, CO2 0 to 20%,
Memmert CO2 Incubator ICO 50, 230Volt, +5C above Ambient to +50C, Humidity, CO2 0 to 20%,
Nuaire Inc IN-VITROCELL NU-5710 INCUBATOR
- Capacity: 5.65 cu ft (160 L)
- Temperature control range: 5°C to 55°C
- Temperature uniformity: ±0.3°C at 37°C
- Temperature accuracy: ±0.1°C
- CO2 control range: 0.1 to 20%
- CO2 accuracy: ±0.1%
- Humidity: Up to 95% RH
- Sterilization cycles: 145°C dry, 95°C humidified
- Chamber material: 16-gauge Type 304 polished stainless steel
- Air quality: ISO Class 5
- CO2 sensor type: Infrared single source dual wavelength
- Control system: NuTouch Electronic Control System (Touchscreen)
- Shelves supplied: 4
- Exterior dimensions: 25.5 in x 27.5 in x 36.188 in
- Interior dimensions: 20.25 in x 20.678 in x 24 in
- Net weight: 220 lbs
- Electrical configuration: 115V, 60Hz (primary), 230V, 50/60Hz (primary)
- Safety certifications: UL, UL-C, CE, UKCA
QED ENVIRONMENTAL SYSTEMS MODEL G100 RH PROBE CO2 0-20
- The unit provides a CO2 measurement range of 0-20%.
- Custom dual wavelength infrared CO2 sensor enhances accuracy.
- CO2 accuracy is ± 1% of range after calibration.
- Response time for CO2 measurements is ≤ 20 seconds.
- Relative humidity (RH) measurement range is 0-100% non-condensing.
- RH accuracy is ± 1.5% across the range.
- Optional measurement of O2 0-100% available on other variants.
- Dual temperature probes measure from 0 to 50°C.
- Temperature accuracy is ± 0.1°C from 32 to 44°C.
- Data storage capacity of 1000 reading sets + 270 events.
- Battery life is up to 12 hours without pump.
- Dimensions are 165 mm (L) x 100 mm (W) x 55 mm (D).
- Weight is 495 grams (1.1 lbs).
- Certifications include ISO/IEC 17025, EN 50270:2006.
Chemglass Life Sciences Incubator, 1.5 Cu. Ft., Water Jacketed, CO², 120V
Anti-Corrosion Anode. Patented Copper-Housed HEPA Filter for Superior Contamination Prevention. Factory Pre-Set, Door Thermostat. Pre-Heated CO2 Gas Inlet for Increased Temperature Uniformity. Front-Mounted Connections for Convenience. Over Temperature and CO2 Alarms. Inner Glass Viewing Door. Stainless Steel Chamber and Autoclavable Door Gasket Make Cleaning Easy. 5-Year Limited Warranty. The CLS-2447 series of CO2 incubators offers dependable infrared (IR), CO2 sensor control and is ideal for QA / QC applications. The incubators include an anti-corrosion anode which allows the use of distilled or tap water in the compact water jacket. De-ionized water should not be used. Anti-contamination features make cleaning a breeze and the CO2 sample port is located on the front control panel for quick and easy access. Incubators have microprocessor controllers. The humidity level inside the chamber is maintained at approximately 95%.
Chemglass Life Sciences Incubator, 5.0 Cu. Ft., Water Jacketed, CO², 120V
Anti-Corrosion Anode. Patented Copper-Housed HEPA Filter for Superior Contamination Prevention. Factory Pre-Set, Door Thermostat. Pre-Heated CO2 Gas Inlet for Increased Temperature Uniformity. Front-Mounted Connections for Convenience. Over Temperature and CO2 Alarms. Inner Glass Viewing Door. Stainless Steel Chamber and Autoclavable Door Gasket Make Cleaning Easy. 5-Year Limited Warranty. The CLS-2447 series of CO2 incubators offers dependable infrared (IR), CO2 sensor control and is ideal for QA / QC applications. The incubators include an anti-corrosion anode which allows the use of distilled or tap water in the compact water jacket. De-ionized water should not be used. Anti-contamination features make cleaning a breeze and the CO2 sample port is located on the front control panel for quick and easy access. Incubators have microprocessor controllers. The humidity level inside the chamber is maintained at approximately 95%.
Chemglass Life Sciences Incubator, 58 Cu. Ft., Large Capacity, CO², 120V
Microprocessor Temperature Control. All Stainless Steel Interior. LED Display of Set point and Chamber Temperature. Infrared CO2 Sensor. Interior Electrical Outlets. 24-Month Limited Warranty. The 2449 series incubators are well-suited for roller bottle apparatus and high-volume tissue culture applications and are ideal for cell harvesting. The 28 and 40 cu. ft. models are suited for roller bottle apparatus. These large capacity incubators maximize laboratory space in a convenient floor model design. The incubators are supplied with (4) one amp interior electrical outlets and gentle mechanical air convection that ensures excellent temperature uniformity and eliminates cold spots. An infrared system accurately controls CO2 levels, provides fast CO2 recovery after door openings and is not affected by temperature or humidity. This unit is supplied with six stainless steel re-enforced shelves, which are adjustable on 1/2 inch increments.